www.MG42.us

3 Mint vietnam era mage dated 69-70, 3 mags for 90$ shipped. Chris... 20rd usgi

Looking for a Milled MG34 topcover and Doppeltrommel cover. I know, yeah right... So, does anyone have one or have a lead on one, shoot me a PM... Thanks, Chris...

Yes they are readily reweldable if you get what's pictured, which you should, I've never had a problem in regards to that with IMA. You will need filler pieces as already stated, but those are easy enough to find/make, some folks also build up the sides and join the weld together depending upon the ...

WILL NOW SELL A LOT OF FOUR MAGAZINES (ALL 1969-1971) FOR 105$ SHIPPED. THAT'S A DEAL FOR HARD TO FIND MINT UNISSUED MAGAZINES! CHRIS

3 mags, mint, 100$ Shipped in the US only, only where allowed by law. I have more than 3 if interested, All Vietnam era, 1969 or 1970 dated, mint, Genuine Colt. PM if interested, Chris.... Would trade a bunch of these towards an MG34 Milled Top Cover if anyone has one (I know...yeah right! )

Well, not a documentary, but Cross of Iron w/ Lee Marvin.....

How's the ejector pin clearance on the ejector plate? Might be one thought....Chris...

I bought my Lafette for 800$ in 2005, wish I would have bought 10 of them, bought kits when they were 400$, and I thought I was getting into the game "late." Wish I would have bought a dozen of those for that price, should have bought the MP44's when IMA was giving them away.....it's a cool accessor...

1) Two boxes (unopened full, 50 ct) of Barnes X .308 165 gr X bullets, stock # 30825- 32$/box 2) One Box (opened, 47 pcs in box) of Barnes .358 300gr Round Nose Soft Point- 30$/box (The Barnes bullets boxes do not fit into a small flat rate priority box, I can open them up and put them into ziploc b...

I agree with the checking the ejector pin, I have bolts that have slide easy and some that don't, and some of that is dependent upon the ejector pin sliding easily, but still working properly under the ejector plate. I'd also suggest taking a sharp pointed tool (awl, scribe, etc.) and run it through...

+1 on what John said, perfectly clean, I have a little bit of lithium grease over the ones that fit tight, reduces friction making it easier to close and open. Chris...

I'm going to take the plunge into reloading Berdan primed brass. If anyone has any 8mm brass that is Berdan primed (I'm also looking for 7.62x39, .303, 7.62x54, 30-06, 6.5 Swede) lying around that they don't have a use for I'd be interested. I'm also interested in picking up German Steel cases (alth...

I bought a front clamp/sight separate, still need the rear sight w/ clamp.....the boxes themselves are out there...empty. They are just hard to find..as well as the sights.... Chris..

I'm pretty sure I've seen shrouds pop up over the past couple years for 800-1000$

If you need a buffer and don't find one with a stock PM me, I think I have several extras....Chris..

I think I paid 500$ for mine several years ago...they have gone up since then for sure.... Chris...

Looking for a 34 milled top cover...Chris PM me...

Time for one more, early carrier, MG34 barrels only, notice the rounded shape of the holders which are of bakelite. also the external shape on the ends is rounded, it doesn't carry the "humps" like the previous carrier I posted to accommodate the MG42 barrel. Chris....

Here is a later carrier....a 34 or 42 barrel will fit in this one....I'll try to post some early 34 only carriers if I have time....Chris..

Here is the .50 M2HB grips

Set listed 1st is for the 1919A4....Asking 275$ shipped in the US. Next set coming up is for the M2 HB FLEX grips M2 BMG, AC Marked, excellent condition...asking 500$ shipped. Will sell both sets for 750$ shipped. Thanks, Chris... Send me a PM or email to cpcg43 at yahoo . com.