Gripstick Cut Info

Ask your build questions here. Welding, assembly, etc.
DrJekyll
Hauptgefreiter
Hauptgefreiter
Posts: 12
Joined: Wed Aug 26, 2009 5:44 pm
Anti-spam: Mg42
Location: Illinois

Gripstick Cut Info

Postby DrJekyll » Mon Sep 03, 2012 10:23 am

I am seeing if anyone has any drawings on where to exactly cut the 42 Gripstick for the BRP ar15 trigger adapter

Steve

LtShaffer
Unteroffizieranwärter
Unteroffizieranwärter
Posts: 38
Joined: Sun Mar 27, 2005 10:48 pm

Re: Gripstick Cut Info

Postby LtShaffer » Mon Sep 17, 2012 10:30 am

I would also like the cut locations.

DrJekyll
Hauptgefreiter
Hauptgefreiter
Posts: 12
Joined: Wed Aug 26, 2009 5:44 pm
Anti-spam: Mg42
Location: Illinois

Re: Gripstick Cut Info

Postby DrJekyll » Mon Sep 17, 2012 7:46 pm

It doesn't seem like anybody has them. How did everybody that used the adapter know where to cut their grip stick

roadrunner
Stabshauptmann
Stabshauptmann
Posts: 161
Joined: Wed May 23, 2012 11:25 pm
Anti-spam: Mg42
Location: alaska

Re: Gripstick Cut Info

Postby roadrunner » Mon Sep 17, 2012 8:28 pm

Dr.J I have one that is machined at BRP. I will try to get some numbers for you. It is extremely pitted so I am going to mill my greek gripstick.

roadrunner
Stabshauptmann
Stabshauptmann
Posts: 161
Joined: Wed May 23, 2012 11:25 pm
Anti-spam: Mg42
Location: alaska

Re: Gripstick Cut Info

Postby roadrunner » Mon Sep 17, 2012 10:44 pm

OK. here it is. You can see that the relief cut is very biased to the left side. I do no think this was intentinal. Also something to keep in mind is there is no relief for the trigger pin extension allowing trigger pack to sit low on the relief shelf. Anyway, I know its a crude drawing but best I could do while my son naps. RR :D
Attachments
gripstick drawing.jpg
grip lft.jpg
grip rt.jpg
grip front.jpg
grip angle view.jpg

roadrunner
Stabshauptmann
Stabshauptmann
Posts: 161
Joined: Wed May 23, 2012 11:25 pm
Anti-spam: Mg42
Location: alaska

Re: Gripstick Cut Info

Postby roadrunner » Mon Sep 17, 2012 10:56 pm

Forgive the spelling. I was rushed.

snekrz
Stabsunteroffizier
Stabsunteroffizier
Posts: 50
Joined: Mon Oct 10, 2011 5:15 pm
Anti-spam: Mg42
Location: USA

Re: Gripstick Cut Info

Postby snekrz » Tue Sep 18, 2012 10:27 pm

I used a dremel and a mini mill to get mine where I wanted it. Test fit it a little at a time. Works great. Still had to trim the hammer and non critical part of the disconnect a little though.

DrJekyll
Hauptgefreiter
Hauptgefreiter
Posts: 12
Joined: Wed Aug 26, 2009 5:44 pm
Anti-spam: Mg42
Location: Illinois

Re: Gripstick Cut Info

Postby DrJekyll » Fri Sep 21, 2012 5:46 pm

Great guys thanks that really helps out a lot

Steve


  • Similar Topics
    Replies
    Views
    Last post

Return to “MG42 Build It Yourself”



Who is online

Users browsing this forum: No registered users and 1 guest