I have been chasing an MG08 belt loader for a long time......having no luck i decided to purchase one of the IMA loaders before they run out of stock, as they only have a couple of units left!.
I understand these were modified by the Turks for the metal belts.
Could anybody here that has one of the IMA loaders tell my what exactly is modified and what is missing.
My aim is to convert the loader back to its original configuration. I am a tool/maker/machinist with a very well equipped machine shop , my aim is to re manufacture the missing components as i doubt obtaining them is possible.
Thanks for any help..
IMA Belt Loader
Re: IMA Belt Loader
There's quite a lot of the internal parts missing, and they've put a piece on the front of the drum to hold the belt, and filed off one set of the pins on the drum. Basically, they took out the pocket opening part of the drum loader, put a front end on the drum to hold the metal belt in place, and filed off the pins that would interfere with the metal belt. I'll see if I can figure out how to do pictures. It could be done, the hard part will be the internal parts.
-
- Hauptmann
- Posts: 125
- Joined: Sat Aug 02, 2008 6:49 am
- Location: Bavaria, Germany
Re: IMA Belt Loader
Hello,
A friend of me plans the same work, he bouht also al IMA loader
I made some drawings to rebuild the missing inner parts for him.
Not a very profesional drawing, only hand made, but the importand measurements are done.
If yo like, i can mail it,
let me know your mail adress.
Fritz
A friend of me plans the same work, he bouht also al IMA loader
I made some drawings to rebuild the missing inner parts for him.
Not a very profesional drawing, only hand made, but the importand measurements are done.
If yo like, i can mail it,
let me know your mail adress.
Fritz
Re: IMA Belt Loader
Thanks for the reply,s.
dwmmg08 pictures would be great if you dont mind.
alpencorps Drawings with measurement,s would be greatly appreciated ...thanks.. my email.. woofer@clearmail.com.au
Would these be any chance you could take some high res pictures of the loader dis-assembled, and all the individual parts?
dwmmg08 pictures would be great if you dont mind.
alpencorps Drawings with measurement,s would be greatly appreciated ...thanks.. my email.. woofer@clearmail.com.au
Would these be any chance you could take some high res pictures of the loader dis-assembled, and all the individual parts?
-
- Hauptmann
- Posts: 125
- Joined: Sat Aug 02, 2008 6:49 am
- Location: Bavaria, Germany
Re: IMA Belt Loader
pics and Drawings are sent...
greetings from Bavaria
Fritz
greetings from Bavaria
Fritz
Re: IMA Belt Loader
Fritz, Thankyou very much.alpencorps wrote:pics and Drawings are sent...
greetings from Bavaria
Fritz
Paul.
Re: IMA Belt Loader
Woofercau: I have a friend selling a loader without box and tools, but in excellent condition, E-mail me if you are interested at bmg17a1@ gmail.com......
Bob Naess
Bob Naess
Re: IMA Belt Loader
Email sent...bmg17a1 wrote:Woofercau: I have a friend selling a loader without box and tools, but in excellent condition, E-mail me if you are interested at bmg17a1@ gmail.com......
Bob Naess
Thanks..
-
- Hauptmann
- Posts: 125
- Joined: Sat Aug 02, 2008 6:49 am
- Location: Bavaria, Germany
Re: IMA Belt Loader
Hello
a find on ebay..
intresting Sparepart for beltloader 16
http://www.ebay.de/itm/MG-08-MG0815-Gur ... 19e0920a51
a find on ebay..
intresting Sparepart for beltloader 16
http://www.ebay.de/itm/MG-08-MG0815-Gur ... 19e0920a51