Page 1 of 1

Someone to build my mg53

Posted: Wed Dec 20, 2017 2:17 pm
by Qbrewer
I have all of the semi parts including the full receiver and shroud. Please help me out! Just send a quote to quentinmarvin72@gmail.com.

Thank you,

Quentin

Re: Someone to build my mg53

Posted: Wed Dec 20, 2017 5:07 pm
by JBaum
A full receiver and shroud? What does that mean, you have 4 pieces and need them trimmed, aligned, welded together straight, assembled into a gun, blued, then made to run as a semi-auto?

I'm not trying to sound unsympathetic or negative in any way, just realistic.

I think it is very unlikely that you will find someone to build a semi MG42 for you. Besides requiring a manufacturer's FFL to build a gun for someone else, they are a real challenge, and can take a lot of time to get one to work properly. It's very rewarding when the builder gets his gun together and running right, but anyone with experience knows the difficulties involved, and won't put themselves through that much trouble for someone else, unless it would pay a LOT of money. Most people with the manufacturer's license build stuff that isn't this much work.

This isn't putting together a clone AR, or building stamped receiver AK. It's a serious bit of work in a lot of ways, and the weekend tinkerer who calls himself a gun builder can easily be in over his head.

If you don't think you're up to the task, sell your parts and buy a gun that's already together and running. You'll be a lot less frustrated that way. If it was easy, someone would make them already assembled and ready to go, for a lot less money than they sell for now. Wise Lite is at $5,196.47 for a finished gun. The builder's kit isn't really overpriced for $3,949.99.

It's likely something decent already built will be $4000 or more, or for less than that, it may not even have been refinished yet, and have welds showing and the rails held in with little bolts.

A few hundred hours or a few thousand dollars. You get to decide what you want to spend to get this toy. This is one I personally wouldn't try.

Re: Someone to build my mg53

Posted: Wed Dec 20, 2017 5:18 pm
by Qbrewer
Thank you for the feedback. I will post pictures later as to what I've got. Agreed that this is a bit beyond me hence me looking for a builder. The receiver and Schroud are new from BRP and are all aligned and welded.

Re: Someone to build my mg53

Posted: Wed Jan 03, 2018 7:17 pm
by robertmcw
Here is why it SHOULD be hard to find someone to build your gun:

https://www.atf.gov/firearms/docs/rulin ... g/download

read it & draw your own conclusions.....

RM

Re: Someone to build my mg53

Posted: Wed Jan 03, 2018 8:23 pm
by JBaum
I would have to wonder whether since the receiver has already been welded together, that it's already a firearm, whether it's has the small stuff done to it yet or not. If so, it may be that completing it may not be considered as manufacturing it, since it may be already "manufactured" (like building an AR from a 100% lower receiver. The only way to know for sure would be to contact ATF, since they're the ones who can charge you if this isn't the case. It isn't something that can be decided with any validity in an online forum.

Re: Someone to build my mg53

Posted: Thu Jan 04, 2018 7:14 am
by robertmcw
Perhaps we need to know if BRP put a serial number on it or not?

Re: Someone to build my mg53

Posted: Fri Jan 12, 2018 6:07 pm
by flemgunner
If it was like the one I bought a while back there still was some operations that needed to be done. Charging handle slot and buffer slots internal to the receiver as I recall. May not be a "full" receiver but I dont recall

Re: Someone to build my mg53

Posted: Fri Jan 12, 2018 6:23 pm
by 42rocker
One of the folks that I would recommend just posted....
One of the best

flemgunner ----- Have him build it. One of the best that I know of of the folks out there building them.

Later 42rocker

Re: Someone to build my mg53

Posted: Sun Jan 14, 2018 6:08 pm
by Tmiller
Quentin I am in the process of building a Wise Lite M53 generation 3. By the time I am done it would have been just less money to purchase the complete gun from Wise Lite. I will say this I have learned a lot about the M53 platform and it was something my 19 year old and me did together so time with the oldest son was priceless.

Re: Someone to build my mg53

Posted: Sun Jan 14, 2018 6:10 pm
by Tmiller
Was Wise Lite's home builders kit.

Re: Someone to build my mg53

Posted: Mon Jan 15, 2018 9:59 am
by 42rocker
Just went to the wise lite arms website the cost of a built "working" m53/42 is $5,200. +/- shipping did not look.

Wow.

Going to have to think about this one.

On topic. Again one of the builders I would talk to is flemgunner. As stated before. Also Brian at brp, but that would require buying new material again.

Also PLEASE folks reading this topic. There a lot of home builds on this site that were home built for a lot less money.

Later 42rocker

Re: Someone to build my mg53

Posted: Tue Jan 16, 2018 1:43 pm
by flemgunner
Thanx for the kind words man. I really appreciate them!
I would be remiss if I didnt say Im actually not taking builds on right now. Im only doing builds for where I work here at drivetanks.com. Just dont have the time for anything else

Re: Someone to build my mg53

Posted: Tue Jan 16, 2018 7:29 pm
by 42rocker
Well flemgunner that just sucks for those folks that need your help man. Now Please go and take a Tank ride for me and Enjoy it.
New job rebuilding and riding in tanks all day long. And you really get paid for this or you have to pay them. LOL

There are a few other folks out there that I would trust, oakrodent is another one.

Later 42rocker

Re: Someone to build my mg53

Posted: Wed Jan 17, 2018 10:23 am
by flemgunner
Yeah its rough but somehow I find the strength to get through the day lol

Re: Someone to build my mg53

Posted: Wed Jan 17, 2018 7:31 pm
by 42rocker
Ok flemgunner please go take a ride on a Sherman for my Dad who used to be a Sherman tank driver then tank commander and then instructor during WW2. Enjoy it also.

Later 42rocker

Re: Someone to build my mg53

Posted: Thu Jan 18, 2018 9:50 am
by flemgunner
Will do man