WTS - SA bolt hold-open device

Need something to start or finish a project? Here ya go.
Post Reply
hgosnell

WTS - SA bolt hold-open device

Post by hgosnell »

After a lot of trial and error, I feel I have made a good bolt hold open device.

Just grab the charging handle with 4 fingers, pull all the way to the rear, push the pin with your thumb and ease forward and bolt is locked to the rear.
Just pull back slightly on the handle, spring loaded pin pops up and lets her slam home. Just that simple.
Parts are made from chrome Molly steel and between the 5 operations of lathe and mill work on each set it takes about at 1/2 hr. to make.
Outside tube is welded to charging handle.

Right now the price is $40.00 for the parts shipped , welded to your charge handle is $20.00 more.

Image

Image

Image
User avatar
TOM R
Field Marshal
Field Marshal
Posts: 3355
Joined: Wed Mar 09, 2005 3:11 pm
Anti-spam: Mg42
Location: ESCAPED FROM Nazi Jersey, !!!

Post by TOM R »

this looks great same idea i had just mounted in a different location :D
Great men are born in fire, it is the privilege of lessor men to light the flame, no matter the cost


FOR M60 GOTO http://WWW.M60MG.COM
nra lifer
mvpa 31698
46 cj2a
54 m37
56 CJ3B U.S. Navy
t24/m29 weasel
Post Reply