Barrel Extensions
Barrel Extensions
I bought several of the stub barrels from Rtg to save the extensions. My question is this. It is going to take heat to remove the cut off barrels from the extensions. If I let them cool down slowly will the heat damage or change the hardness of the extensions? I don't want to put them on good barrels if they are not safe.
43 M3A1, 42 CCKW 129,XXX, 43 GPW 146954, 43 WC54 81635383, 43 WC54 81665843, 45 WC52 818682 "MO', 43 WC63 82009972 "BIG MO", 44 GTBA NAVY CARGO 218299, 43 PE95, 44 Checker K52 Trailer,42 MBT 375, 44 Coverto Trailer 886475
- Sd.kfz.173
- Stabshauptmann
- Posts: 185
- Joined: Wed Jul 02, 2008 11:08 pm
- Location: Roundup Montana
- Contact:
Re: Barrel Extensions
DO NOT HEAT THEM!!!!
The cut stubs are pinned. All you have to do is clamp the barrel extensions in a padded vice, and twist the stubs out with a pipe wrench. I bought a bunch also, and they are fairly easily removed .Hope this helps.
Bill
The cut stubs are pinned. All you have to do is clamp the barrel extensions in a padded vice, and twist the stubs out with a pipe wrench. I bought a bunch also, and they are fairly easily removed .Hope this helps.
Bill
Re: Barrel Extensions
Thanks Bill......That's what I will do.
43 M3A1, 42 CCKW 129,XXX, 43 GPW 146954, 43 WC54 81635383, 43 WC54 81665843, 45 WC52 818682 "MO', 43 WC63 82009972 "BIG MO", 44 GTBA NAVY CARGO 218299, 43 PE95, 44 Checker K52 Trailer,42 MBT 375, 44 Coverto Trailer 886475