Gripstick Cut Info

[DrJekyll]

I am seeing if anyone has any drawings on where to exactly cut the 42 Gripstick for the BRP ar15 trigger adapter

Steve

[LtShaffer]

I would also like the cut locations.

[DrJekyll]

It doesn't seem like anybody has them. How did everybody that used the adapter know where to cut their grip stick

[roadrunner]

Dr.J I have one that is machined at BRP. I will try to get some numbers for you. It is extremely pitted so I am going to mill my greek gripstick.

[roadrunner]

OK. here it is. You can see that the relief cut is very biased to the left side. I do no think this was intentinal. Also something to keep in mind is there is no relief for the trigger pin extension allowing trigger pack to sit low on the relief shelf. Anyway, I know its a crude drawing but best I could do while my son naps. RR

[roadrunner]

Forgive the spelling. I was rushed.

[snekrz]

I used a dremel and a mini mill to get mine where I wanted it. Test fit it a little at a time. Works great. Still had to trim the hammer and non critical part of the disconnect a little though.

[DrJekyll]

Great guys thanks that really helps out a lot

Steve