Page 1 of 1
Wise Lite Vs BRP Rear Receiver section
Posted: Wed Apr 07, 2010 7:56 am
by zb-30
I'm in the process of gathering all my parts for my semi Mg-42 build. Is there any difference between the Wise Lite and the Brp 100% rear receiver sections? Is one preferred over the other? Why?
Thanks!
Re: Wise Lite Vs BRP Rear Receiver section
Posted: Wed Apr 07, 2010 6:41 pm
by Michael J
edit misread: didnt see 100%. Wiselite are longer in the cam, and buffer areas i believe
Re: Wise Lite Vs BRP Rear Receiver section
Posted: Wed Apr 07, 2010 6:43 pm
by zb-30
Michael J wrote:edit misread: didnt see 100%. Wiselite are longer in the cam, and buffer areas i believe
So, does the extra length make for a better semi auto? My build will be a dedicated .308 gun and I am considering using an MG3 buffer and recuperator.
Re: Wise Lite Vs BRP Rear Receiver section
Posted: Wed Apr 07, 2010 6:51 pm
by Michael J
extra length in the camming area is to compensate for the yugo m53 barrel shrouds being cut near the rear sight base. Longer length in the back , to the best of my knowledge, doesnt benefit you really, but does require you to buy or turn on a lathe, a buffer extension.
Re: Wise Lite Vs BRP Rear Receiver section
Posted: Wed Apr 07, 2010 7:07 pm
by zb-30
That would explain the buffer extention that wise lite uses, interesting.
Re: Wise Lite Vs BRP Rear Receiver section
Posted: Wed Apr 07, 2010 7:43 pm
by Bil
That is so the full-length spring can be used,rather that cutting one.The extra doesn't show much,but I have seen posts that say it makes it a bit too long for the original lafette mount. ---bil