Hello everyone
i'm new to the forum,i have a chance to buy a first generation TNW mg34,which the gentleman told me it's not running correctly.i haven't seen it yet,so some time this week,i'm going to check it out.it comes with afew ammo boxes and belts. the gentleman has no ideal what's wrong with this gun.what's the going price on a TNW mg34?and i've hear alot of bad stories about TNW? Is it the bastard of semi auto's? what are some of the issues that are the main problems that plage the TNW''s mg34?
thanks everyone
landser
price check on a TNW mg34
-
ChrisPCook
- Oberst
- Posts: 539
- Joined: Mon Feb 27, 2006 4:01 pm
- Location: Idaho
Re: price check on a TNW mg34
Use the search function on the forum and dig back through all the threads. TNW is the 800 pound gorilla in the room, they need tweaking and babying at times, but they do work.... There are trigger upgrades available as well. Chris...
-
tomcatshaas
- General
- Posts: 1402
- Joined: Fri Dec 02, 2005 7:23 am
- Location: Minnesota
Re: price check on a TNW mg34
well main problem is the heat treat of the sears. Sears wear out. If you keep a supply of those, you should be good.
The other issues, are that the tolerances on the MG34 are fairly close. People fail to properly lube them. You should use the proper lube that TNW recommends and lube it correctly. People don't lube the barrel bearing surface, and it will stop or short cycle.
As chris stated, they are the Harley of semi auto's. They always need some attention.
PM me, and I will tell you the Dealer price. I'm also selling a TNW that runs well.
TC
The other issues, are that the tolerances on the MG34 are fairly close. People fail to properly lube them. You should use the proper lube that TNW recommends and lube it correctly. People don't lube the barrel bearing surface, and it will stop or short cycle.
As chris stated, they are the Harley of semi auto's. They always need some attention.
PM me, and I will tell you the Dealer price. I'm also selling a TNW that runs well.
TC
-
landser
Re: price check on a TNW mg34
the guy said the previous owner did not lube the mg34 well enough,and things maybe he torched,so what can be damaged?
-
tomcatshaas
- General
- Posts: 1402
- Joined: Fri Dec 02, 2005 7:23 am
- Location: Minnesota
Re: price check on a TNW mg34
well not running correctly can mean so many things.
But just vaguely, I would look for galling in the barrel bearing area. That's at the front of the barrel shroud. Also in the area of the barrel cams. And then the bolt guides for starters.
But just vaguely, I would look for galling in the barrel bearing area. That's at the front of the barrel shroud. Also in the area of the barrel cams. And then the bolt guides for starters.